Hailea Aquarium Chiller HC500

Water temperature is very important and by keeping it between 18-21 Celsius will ensure maximum oxygen levels, improved nutrient uptake and help keep Pythium (root rot) at bay. Rising temperatures can occur more oftenÊduring the warmer months of the year or simply if your grow room is hotter than normal. Using one of these Hailea Water Chillers will ensure it remains where it needs to be at all times. \n \nAll Hailea Chillers are capable of chilling and maintaining a water temperature between 6-30 degrees Celsius. The HC-2200B model can also heat water up to a maximum of 46 degree Celsius. \n \nTo use place the required water pump in your reservoir or header tank and connect the outlet of the pump to the inlet connection on the chiller using flexible pipe. Then using another piece of flexible pipe connect a length from the outlet of the chiller and place inside your tank. Depending on what type of tank you have or system you are using it is better to have the inlet and outlet pipesÊin different locations for maximum effectiveness: \n \n- In a water butt always place the pump at the bottom and have the outlet pipe at the top.ÊThis applies to IWS Flood & DrainÊand IWS Deep Water Culture. \n \n- In a 'tray' style reservoir like an NFTÊhave the inlet at one end and the outlet at the other. \n \n- For IWS R-DWC and Rush R-DWC always chill the brain pot as the system constantly recirculates the nutrient solution around. \n \nhailea-aquarium-chiller-hc500-hailea-aquarium-chillerare-capable-of-maintaining-a-water-temperature \n \nHC-300A \n \n- Water Refrigerated: 300Êlitres \n \n- Required Water Flow Rate: 1000-2500 litres per hour \n \n- Recommended Water Pump: Maxi-Jet MJ1000Êor Hailea HX-4500 \n \n- Consumption: 90w \n \nHC-500A \n \n- Water Refrigerated: 500Êlitres \n \n- Required Water Flow Rate: 1200-3000 litres per hour \n \n- Recommended Water Pump: Hailea HX-4500 or Hailea HX-8830 \n \n- Consumption: 375w \n \nWe recommend to always 'over-spec' your chiller so it is not running at full capacity. To work out what one you require, calculate the total maximum water capacity your system or reservoir will hold and then choose a chiller which can cope with this volume. When possible place your chiller outside your grow room - they work in the same way as a fridge and do generate some heat.